Durable Forklift Gear Pump , High Pressure Gear Pump GPY HGP SGP KZP4
| GPM @ 1,800 rpm, Shaft End: | 76.0 LB |
| Port Size: | Flange Mount |
| Relief Valve Setting: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: | 3525VQ38A12-11AA20-LH |
| Weight: | 3 |
| Model No.: | Flange |
| Cover End Flow @ RPM: | N/A |
| Cover End Pressure [Max: | Standard Pilot |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Shaft End | 76.0 LB |
| Port Size | Flange Mount |
| Relief Valve Setting | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End | 3525VQ38A12-11AA20-LH |
| Weight | 3 |
| Model No. | Flange |
| Cover End Flow @ RPM | N/A |
| Cover End Pressure [Max | Standard Pilot |
| Spline Description | 1.25 in |
| Shaft Seal Type | 14 Tooth Splined |
| Seal Material | 3525VQ |
| Minor Diameter | 1 15/16 in |
| Integral Valve Configuration | Buna-N |
| Manufacturer Part No. | 2400 |
| Port Orientation - Shaft End | 1.04 in |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
| Major Diameter [Min | 12/24 |
| Pump Series | 2500 |
| Shaft End Pressure [Max | 2400 |
| Max. RPM [Max | N/A |
| Minor Diameter [Max | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Mounting | 1.248 in |
| Major Diameter [Max | 1.247 in |
| Rotation | N/A |
| Pilot Type | N/A |
| Pressure Port Size, Cover End | N/A |
| Minor Diameter [Min | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Mounting Flange | 3525VQ38A12-11AA20-LH |
| Shaft Type | 3000 |
| Displacement Cover End (cu in/revolution) | 3000 |
| Shaft End RPM [Max | 18 |
| Shaft Dia. | 57 |
| Port Type | w/o Integral Valves |
| Shaft Key | Outlet 135° CCW from Inlet |
| Shaft Length | Outlet Opposite Inlet |
| Controlled Flow Rate | 1 in Flange |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Port Orientation - Cover End | 2.45 |
| Shaft End Flow @ RPM | 7.42 |
Company Profile
| Worktime |
9:00 — 18:00 |
| Phone |
1-220-946-2173 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance