SGP1A36R SGP1A34R Shimadzu Gear Pump , Industrial Gear Pumps SGP1A32R SGP1A23R
| Displacement Shaft End (cu in/revolution): | 11.8 |
| Mounting: | Flange Mount |
| Cover End Pressure [Max: | Right Hand (CW) |
| Shaft Type: | 4525V60A21-11AA22R |
| Minor Diameter [Max: | 3.5 |
| Manufacturer Part No.: | Flange |
| Integral Valve Configuration: | N/A |
| Relief Valve Setting: | 22 |
| PDF |
|
Product Details
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Mounting | Flange Mount |
| Cover End Pressure [Max | Right Hand (CW) |
| Shaft Type | 4525V60A21-11AA22R |
| Minor Diameter [Max | 3.5 |
| Manufacturer Part No. | Flange |
| Integral Valve Configuration | N/A |
| Relief Valve Setting | 22 |
| Weight | Standard Pilot |
| Port Type | 1.56 in |
| Rotation | 14 Tooth Splined |
| Pilot Type | 4525V |
| Major Diameter [Min | 2 7/16 in |
| Spline Description | Double |
| Major Diameter [Max | Buna-N |
| Pressure Port Size, Shaft End | 1 1/2 in Code 61 |
| Minor Diameter [Min | 1.055 in |
| Pump Series | SAE C, 2 Bolt |
| Seal Material | Single Shaft Seal |
| Cover End Flow @ RPM | 12/24 |
| Shaft Seal Type | Motor |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| GPM @ 1,800 rpm, Cover End | 1800 |
| Max. RPM [Max | N/A |
| Cover End RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Dia. | 1.25 in |
| Displacement Cover End (cu in/revolution) | 4.1 |
| Controlled Flow Rate | 1.06 in |
| Port Orientation - Cover End | 1.05 in |
| Port Size | N/A |
| Shaft End Pressure [Max | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 4525V60A21-11AA22R |
| Pressure Port Size, Cover End | 1 in Code 61 |
| Shaft Key | 2500 |
| Mounting Flange | 2500 |
| Shaft Length | 31.5 |
| Model No. | 90 |
| Shaft End RPM [Max | 135° CCW From Inlet Port |
| Minor Diameter | N/A |
| Shaft End Flow @ RPM | Outlet 135° CCW from Inlet |
Company Profile
| Worktime |
9:00 — 18:00 |
| Phone |
1-220-946-2173 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance