Sumitomo Internal Hydraulic Gear Pump Low Noise Performance For Servo System
| Minor Diameter [Min: | 45.0 LB |
| Mounting Flange: | Flange Mount |
| Pressure Port Size, Shaft End: | Right Hand (CW) |
| Cover End Flow @ RPM: | 2520VQ12A5-11DD20 |
| Shaft End Pressure [Max: | 2 1/2 |
| Shaft End Flow @ RPM: | Flange |
| Pilot Type: | N/A |
| Shaft End RPM [Max: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Min | 45.0 LB |
| Mounting Flange | Flange Mount |
| Pressure Port Size, Shaft End | Right Hand (CW) |
| Cover End Flow @ RPM | 2520VQ12A5-11DD20 |
| Shaft End Pressure [Max | 2 1/2 |
| Shaft End Flow @ RPM | Flange |
| Pilot Type | N/A |
| Shaft End RPM [Max | Standard Pilot |
| Minor Diameter | 0.875 in |
| Spline Description | 13 Tooth Splined |
| Manufacturer Part No. | 2520VQ |
| Mounting | 1 3/8 in |
| Port Type | Buna-N |
| Major Diameter [Min | 2700 |
| Cover End RPM [Max | 0.715 in |
| Shaft Dia. | SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | 16/32 |
| Port Orientation - Shaft End | 2700 |
| Model No. | 2700 |
| Shaft Length | N/A |
| Port Orientation - Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Max. RPM [Max | 0.873 in |
| Seal Material | 0.872 in |
| Displacement Shaft End (cu in/revolution) | N/A |
| Cover End Pressure [Max | N/A |
| Shaft Key | N/A |
| Pressure Port Size, Cover End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Relief Valve Setting | 2520VQ12A5-11DD20 |
| Major Diameter [Max | 3000 |
| Minor Diameter [Max | 3000 |
| Displacement Cover End (cu in/revolution) | 7.5 |
| Controlled Flow Rate | 18 |
| Rotation | w/o Integral Valves |
| Port Size | Outlet 135° CW from Inlet |
| Pump Series | Outlet 90° CW from Inlet |
| Integral Valve Configuration | 3/4 in Flange |
| Shaft Seal Type | 1 in Flange |
| Shaft Type | 1.1 |
| Weight | 2.45 |
Company Profile
| Worktime |
9:00 — 18:00 |
| Phone |
1-220-946-2173 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance