Easy Repair Hydraulic Vane Motor 25m 35m 45m For Elevator Scraper Drives
| Minor Diameter: | 18.0 LB |
| Rotation: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Left Hand (CCW) |
| Shaft Type: | SAE-20 |
| Shaft End Flow @ RPM: | SAE |
| Mounting Flange: | 3/16 in |
| Cover End Flow @ RPM: | 12 |
| Pressure Port Size, Cover End: | 8 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Minor Diameter | 18.0 LB |
| Rotation | Flange Mount |
| Displacement Cover End (cu in/revolution) | Left Hand (CCW) |
| Shaft Type | SAE-20 |
| Shaft End Flow @ RPM | SAE |
| Mounting Flange | 3/16 in |
| Cover End Flow @ RPM | 12 |
| Pressure Port Size, Cover End | 8 gpm @ 1200 rpm |
| Cover End RPM [Max | 0.75 in |
| Shaft End Pressure [Max | Straight w/ Key |
| Integral Valve Configuration | 12 / 1750 |
| Manufacturer Part No. | V20 |
| Minor Diameter [Max | 2.66 in |
| Seal Material | SAE-8 |
| Port Orientation - Shaft End | Buna-N |
| Spline Description | 2800 |
| Max. RPM [Max | 2500 psi |
| Displacement Shaft End (cu in/revolution) | 12 |
| Relief Valve Setting | S |
| Port Orientation - Cover End | SAE A, 2 Bolt |
| Shaft Length | T |
| GPM @ 1,800 rpm, Cover End | 1 |
| Port Size | Opposite Inlet Port |
| Controlled Flow Rate | 1.62 |
| Pressure Port Size, Shaft End | 3 gal/min |
| Pump Series | Priority Valve & Relief |
| Major Diameter [Min | 1500 psi |
| Weight | 1A |
Company Profile
| Worktime |
9:00 — 18:00 |
| Phone |
1-220-946-2173 |
25M 35M 45M 50M Vickers Hydraulic Motor Wide Speed Range With Lower Noise